News

Composition Of Movable Scissor-lift

  Composition of movable scissor-lift

  A lift is a lifting device that lifts people or goods to a certain height, mainly for personnel to ascend the work and vertically transport goods. The movable scissor-fork elevator has the advantages of simple structure, stable operation and simple operation, and it has been widely used in civil aviation, transportation, metallurgy, automobile manufacturing and other industries. However, the shear-fork elevator still has problems such as low bearing capacity and slow running speed.

  Scissor-type lifts consist of two parts, the mainframe and the hydraulic system.

  First, the host

  The movable scissor Lift is composed of a worktable, scissor-lift a lifting member, a chassis and a driving device. The worktable is a good rigid platform, with railings around it, and the lower part is supported by an arm frame. The lifting platform is composed of a shearing fork arm frame. The arms are articulated in the middle with a pin shaft and an outer arm frame. The lifting height can be divided into several sections, scissor-lift a group of arms is a section, each section is hinged at the end of the arm frame. The hydraulic cylinder is mounted on the beam in the middle of the arm frame, and the tubing and the wire are fixed on the arm. The chassis is equipped with 4 walking wheels for mobile use. There are two guides on the chassis and under the working Platform, and the Guide rollers on the end of the arm are rolled. The hydraulic and electrical control of the whole machine is concentrated in the drive control box. The tilting arrangement of the host hydraulic cylinder avoids the disadvantage of the low stability of the hydraulic cylinder and the poor sealing performance when the horizontal arrangement is arranged when the vertical arrangement is made, and the structure is more reasonable.

  II. HYDRAULIC SYSTEM

  The hydraulic system adopts pump-hydraulic cylinder drive to realize the normal work of scissor-type elevator. In the rising state, the lifting table can rise steadily. In the case of power outage, the lifting table can continue to rise to complete the working condition. In the declining state, the speed of the lifting table is stable, steady whereabouts, no impact. In the case of power failure, the lifting table can be fixed at a certain place, do not appear as a result of the joint action of gravity and load and suddenly fall, causing an accident;

  Composition of movable scissor-lift

  A lift is a lifting device that lifts people or goods to a certain height, mainly for personnel to ascend the work and vertically transport goods. The scissor-type elevator is simple in structure, stable in operation and simple in operation, and widely used in civil aviation, transportation, metallurgy, automobile manufacture and other industries. However, the shear-fork elevator still has problems such as low bearing capacity and slow running speed.

  Scissor-type lifts consist of two parts, the mainframe and the hydraulic system.

  First, the host

  The movable scissor Lift is composed of a worktable, a lifting member, a chassis and a driving device. The worktable is a good rigid platform, with railings around it, and the lower part is supported by an arm frame. The lifting platform is composed of a shearing fork arm frame. The arms are articulated in the middle with a pin shaft and an outer arm frame. The lifting height can be divided into several sections, scissor-lift a group of arms is a section, each section is hinged at the end of the arm frame. The hydraulic cylinder is mounted on the beam in the middle of the arm frame, and the tubing and the wire are fixed on the arm. The chassis is equipped with 4 walking wheels for mobile use. There are two guides on the chassis and under the working Platform, and the Guide rollers on the end of the arm are rolled. The hydraulic and electrical control of the whole machine is concentrated in the drive control box. The tilting arrangement of the host hydraulic cylinder avoids the disadvantage of the low stability of the hydraulic cylinder and the poor sealing performance when the horizontal arrangement is arranged when the vertical arrangement is made, and the structure is more reasonable.

  II. HYDRAULIC SYSTEM

  The hydraulic system adopts pump-hydraulic cylinder drive to realize the normal work of scissor-type elevator. In the rising state, scissor-lift the lifting table can rise steadily. In the case of power outage, the lifting table can continue to rise to complete the working condition. In the declining state, the speed of the lifting table is stable, steady whereabouts, no impact. In the case of power failure, the lifting table can be fixed at a certain place, do not appear as a result of the joint action of gravity and load and suddenly fall, causing an accident;